Diesel Flat Die Feed Pellet Mill Introduction
Diesel flat die pellet mill is driven by a diesel engine, together with gearbox to change its speed. This diesel type feed pellet mill can run smoothly with little noise and is especially popular in the electricity lacking areas. Diesel feed pellet mill is capable to process corn, wheat, grass powder, straw powder,etc into feed pellets for rabbits, chicken, sheep, fish, shrimp and so on. It is especially applicable to medium or small size feed-process factory and farm-holders; while for large scale feed pellets prodcution, ring die feed pellet machine is your best choice.
Pellets-making Procedure with Diesel Feed Pellet Machine
1.Raw materials need to be crushed and dried.
2.Then mix the main material and many other additive materials evenly.
3.Put the powder into the chamber, then the roller presses the powder through the holes in the die to form feed pellets meanwhile a cutter in the other side of the die cuts the feed pellets that has been pressed out from the holes.
4.Make sure the feed pellets are cooled before the storage.
Feed pellets size ranges: Φ2.5mm, Φ3mm, Φ4mm, Φ6mm, Φ8mm
Diesel Feed Pellet Press Advantages
1.For power feed and grass meal processing, no (or little) liquid additives need to be added for granulation. So the formed feed pellets moisture content is basically is equal to to pre-pelleting level.
2.Structured with high quality alloy steel, extent roller using life, adapt to different materials, ensure the suppression effect.
3.Feed Pellets made by diesel feed pellet mill have high hardness, smooth surface, fully degree of internal maturation. It can not only improve the digestion and absorption of nutriment, but kill pathogenic microorganisms and parasites, obtained higher economic benefits than mixed powder feed.
4.Simple structure, wide applicability, small floor coverage, low noise.
Diesel Feed Pellet Mill Technology Data
||Feed pellets capacity
||Diameter of mould